Share:

Motogadget Motoscope Pro

SKU: MG100530 Categories: , , Tag:

$ 595.00 $ 595.00

The Motoscope Pro is Motogadget’s most recent addition to they’re digital dashboard series. Full of features in a compact stylish design.

 

Availability: 2 in stock (can be backordered)

Loading...

The Motogadget Motoscope Pro is the most recent addition to they’re digital dashboard series. Full of features in a compact stylish design.

Cutting edge technology enables us to create ultra-slim casing designs. 734 LEDs – governed by a 16-bit RISC processor – create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a matter of course.

The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.

Four indicator lights are pre-installed and can be used for far more input signals via the Breakout Boxes.

The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional Breakout Boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes application to a wide range of vehicles and tasks possible.

The billet aluminum casing is CNC-machined and is easily mounted by two backside threaded holes. The instrument is equipped with an ABE and does not have to be registered.

Included Parts

  • Motoscope Pro with ca. 55 cm connector cable
  • Speedometer sensor M5 x 0,5 fine-pitch thread (stainless steel, IP67) with ca. 150 cm connector cable
  • 2 magnets
  • Push button mini
  • 10 cable end connectors
  • In-line fuse
  • 2 stainless steel screws
  • Detailed installation and operating instructions
  • Please note: Touch sensor not included anymore.  

Specifications and Features

Length, Height, Depth109 mm/ 47 mm/ 11 mm
Weight w/ cableapprox. 100 g
Mount2 x M3 threaded hole
Power consumption, operatingmax. 200 mA (load dependent)
Power consumption, standby0.4 mA (load dependent)
Operating voltage9 V – 15 V
Operating temperature-20°… +80°C
Rev counter (LED bargraph)0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer0 – 350 km/h or mph
Trip meter Abis 999.9 km or mi
Trip meter Bbis 999.9 km or mi
Total mileage (adjustable)bis 250000 km or mi
Operating hours/Service0 – 9999.5 h
Clock23:59 h/min
Timekeeping0 – 99:59:59 h/min/s
RPM count (on LCD)0 – 20000 rpm
Adjustable RPM warning (gear shift flash)0 – 20000 rpm
On-board voltage9  – 18 V
Low voltage warningWarning if below ca. 11V
Timekeeping 0 – 100 km/h or 0 – 60 mph0.00 – 30.59 sec.
Actual accelleration+/- 0.00 – 1.50 G
Average speed0 – 350 km/h or mph
Max. speed0 – 350 km/h or mph
Max. RPM0 – 20000 rpm
Max. positive acceleration+1.50 G
Max. negative acceleration– 1.50 G
Gear displayN, gear 1 – 6
Green control LED (w/ breakoutbox A/B)Neutral (N)
Green control LED (w/ breakoutbox A/B)Turn indicator left/right
blue control LED (w/ breakoutbox A/B)High beam
Red control LED (w/ breakoutbox A/B)Miscellanious warning funktions
Fuel/Reserve (w/ breakoutbox A/B)0 – 100% w/ low warning
Air temperature* (w/ breakoutbox B)-20 – 80 °C / -4 – 176 °F w/ high/low warning
Water temperature* (w/ breakoutbox B)40 – 120 °C / 104 – 248 °F w/ high/low warning
Oil temperature* (w/ breakoutbox B)40 – 150 °C / 104 – 302 °F w/ high/low warning
Oil pressure* (w/ breakoutbox B)0 – 8 bar / 0 – 116 psi w/ high/low warning
Weight 250 g
Dimensions 21 × 17 × 12 cm

Reviews

There are no reviews yet.

Be the first to review “Motogadget Motoscope Pro”

Your email address will not be published.

You may also like…

Scroll to Top