Universal Twin Throttle Cable Kit 1.35m
This high quality universal cable kit By Venhill includes all the necessary components to make your own custom twin throttle cables. One end of the inner cable is fitted with a barrel nipple (5.75mm O.D. x 5.5mm). The other end will need to cut to the right length and fitted with the correct nipple which is soldered into place.
Basic soldering kit is required to solder the nipples in place. The universal cable kit By Venhill includes various ferrules and adjusters that can be adapted for a variety of models.
The adjusters are a snug fit on the conduit which can be bonded in place or with the use of a small centre punch to make a small indentation on the side of the adjuster.
Genuine High Quality Venhill Throttle cable including galvanized steel wire for easy soldering and PTFE (Teflon) liner for super smooth, low friction operation.
Included in the Kit
- 2 x 1.35m of 6mm O.D. Standard Black Conduit with Teflon Liner
- 2 x 2.0m of Galvanized Inner Wire 1.5mm
- 2 x soldered Barrel Nipple (5.75mm x 5.5mm) Fitted on One End
- 2 x Ferrule 6.5mm nose crimped to outer
- 1 x Ferrule bend Suzuki Throttle closed
- 1 x Ferrule bend Suzuki Throttle open
- 2 x Ferrule 5mm nose
- 2 x Ferrule 6.5mm nose
- 2 x Ferrule 5.5mm nose with groove
- 1 x Rubber boot Push/Pull throttle
- 4 x Neoprene tapered rubber boot
- 2 x Tab washer – M6 spindle hole
- 2 x Barrel Nipple 6mm x 1.0mm
- 2 x Barrel Nipple 6mm x 8mm
- 2 x Ferrule bend 45° – Throttle
- 2 x Solderless barrel nipple 6mm x 10mm
- 4 x Locknut M6 x 1.0 Stainless Steel
- 2 x Steel adjuster screw M6 x 1.0 x 25mm
- 2 x Solderless barrel nipple 5mm x 7.5mm
There are no reviews yet.